Need help?Do you have a question about the Mordax DATA and is the answer not in the manual?
Process for updating the main operational software for the DATA module.
Process for updating the startup program (bootloader) of the DATA module.
Calibrates digital-to-analog converters (DACs) using external measurement tools.
Calibrates analog-to-digital converters (ADCs) using internal signal routing.
Explains the visual elements and controls of the oscilloscope interface.
Details how to synchronize the display with incoming signals using trigger modes.
Adjusting trigger threshold and signal edge detection for stable display.
Setting the time base for the X-axis display to analyze signal duration.
Understanding and avoiding signal distortion due to sampling rate limitations.
Adjusting the voltage scale for the Y-axis display to view signal amplitude.
Using on-screen markers for precise measurements of voltage and time spans.
Adjusting input sensitivity for low-amplitude signals for accurate frequency analysis.
Explains the visual elements and parameters of the tuner interface.
Explains the visual elements and parameters of the waveform generator interface.
Configuration and display overview for the internal clock generator mode.
Configuration and display overview for syncing with external clock signals.
Explains the visual elements and functions of the voltage monitoring program.
General| Depth | 25 mm |
|---|---|
| Type | Modular Synthesizer |
| Function | Oscilloscope, Tuner |
| Display | 2.8" LCD |
| Voltage Range | +/- 10V |
| Inputs | 4 CV/Audio Inputs |
To Next Page