Morehouse UCM - Page 11

Universal Calibrang Machine
(UCM) Manual
(PM-5201)
Morehouse Instrument Company, Inc.
1742 Sixth Ave., York, PA 17403-2675 USA
Phone: (717) 843-0081
www.mhforce.com
Page 11
Rev. 3/2024
Universal Hydraulic Pump (UHP)
The Morehouse Universal Hydraulic Pump (UHP) is comprised of an electric motor-driven pump that eliminates
the eort required to operate the hand pump. It is recommended for use with calibrang machines of 60,000
lbf (250 kN) and higher capacies. Morehouse adjusts the hydraulic uid ow for UHP units based on the
capacity and size of the machine. The operator uses the momentary switch in front of the unit to acvate the
electric motor and run the hydraulic pump. A hydraulic hose assembly connects the Universal Hydraulic Pump
(UHP) to the hydraulic jack.
Figure 6: Morehouse Universal Hydraulic Pump
For more details see the Universal Hydraulic Pump PM-5251.