Morehouse UCM - Page 27

Universal Calibrang Machine
(UCM) Manual
(PM-5201)
Morehouse Instrument Company, Inc.
1742 Sixth Ave., York, PA 17403-2675 USA
Phone: (717) 843-0081
www.mhforce.com
Page 27
Rev. 3/2024
For more details see the Quick Change Adapters for Tension Force Calibraon PG-5901.
Clevis Assembly for Tension Setup
Standard Morehouse Clevis assemblies are adaptable to the Quick-Change Tension Adapters system.
A clevis can be aached to a Tension Member in two possible ways based on the thread size on the clevises’
mounng hole:
1. Using an intermediate Threaded Adapter to aach the clevis to the Coupling Nut
2. Aaching the Clevis directly to the Retaining Ring aer removing the Coupling Nut from the Tension
Member.
Figure 22: Morehouse Adaptable Clevit Kit
Figure 23: Morehouse Quick Change Tension Members and Clevis