Contents
Introduction page A-1 Rectifying Faults
Functional Description: Methods for Repair page G-1
General Description page B-1 Safety:
Overview page B-2 Safety Devices page H-1
Machine Description page B-3 Regulations page H-2
Description of the Lever
Linkage System page B-4
Index of Spare Parts
Overview page I-1
Cutting Method page B-5 Machine page I-2
Technical Data page C-1 Knife Block Unit page I-3
Dimensions of Work Pieces page C-2 Drive Mechanism page I-4
Assembly Instructions: Rebate Supports page I-5
General page D-1 Accessories
Mounting of Table Extension page D-1 Automatic Rebate Support Attachment
Mounting of Divided Beam page D-1 Description page L-1-1
Operating Instructions: Installation Instructions page L-1-2
Operating Devices page E-1 Adjustment of Rebate Supports page L-1-3
Before operating page E-2 Index of Spare Parts page L-2
Degree Adjustment of Fences page E-3
Exact Adjustment of fences page E-3
Adjustment of Length of Moulding page E-4
DeLuxe Measuring Scale page E-4-1
Adjustment of Rebate Supports page E-5
Adjustment of Forward Movement page E-5
Adjustment of Height Stop page E-6
Working Procedure page E-7
Post Working Procedure page E-7
Service References:
Lubrication Instructions page F-1
Cleaning page F-1
Changing of Knives page F-2
Grinding of Knives page F-3
Regulation of Draw Bar page F-4
Adjustment of Forward Movement page F-4
Adjustment of Springs page F-5
Adjustment of Height Movement page F-6
Changing of Spare Parts page F-7
To Next Page
Loading...
