Instruction Manual
MORSØ Mitring Machine
Model F
61
Accessories L-1-1
Automatic Rebate Support Attachment.
The automatic rebate support attachment is available as an accessory.
The automatic rebate support attachment is ideal for series production of frames.
With this accessory, the rebate supports automatically return to the adjusted width after each
cutting cycle. Manual resetting is therefore eliminated.
The rebate supports are adjusted both to the width of the moulding and the height of the
rebate.
During the cutting cycle when the knives are manually moved forward the rebate supports
will automatically move in sequence.
When the cutting cycle is finished, and the knives are returned
to the rearmost position, the automatic rebate supports also
return in unison, ready to accept the next work piece.
To Next Page
Loading...
