Need help?Do you have a question about the Morso F and is the answer not in the manual?
Explains how to use the manual's reference system for quick information retrieval.
Provides an overview of the MORSØ-F mitring machine's capabilities and features.
Presents a diagram with numbered parts for an overview of the machine.
Details the construction and key components of the MORSØ-F mitring machine.
Explains the operation and mechanics of the machine's lever system.
Outlines the procedure for cutting mouldings with the MORSØ-F mitring machine.
Lists specifications like dimensions, working capacity, and siting considerations.
Illustrates how to determine the width and height of the work piece using scales.
Covers initial setup, transit locking pin removal, and machine securing.
Details the process for attaching the table extension and divided beam.
Identifies and explains the various controls and operating parts of the machine.
Lists essential checks and adjustments required before using the machine.
Describes necessary adjustments like fence angle, moulding length, and rebate supports.
Explains how to adjust fences for precise mitre angles.
Details how to set up the machine for precise moulding lengths.
Explains the use of the de-luxe measuring scale for accurate frame dimensions.
Guides on how to adjust the rebate supports for specific mouldings.
Explains how to set the forward movement of the knife block for cutting.
Details how to adjust the height stop for the knife block.
Provides a step-by-step guide on how to operate the machine for cutting.
Outlines post-operation tasks like cleaning and securing the machine.
Specifies lubrication points and frequency for machine maintenance.
Provides instructions on how to clean the machine after use.
Details the procedure for safely replacing the machine's knives.
Explains the correct method for grinding the machine's knives.
Covers adjusting the draw bar and forward travel for optimal cutting.
Guides on how to adjust the return springs for proper knife block action.
Explains how to adjust the height movement of the knife block.
Provides guidance on how to identify and replace spare parts.
Lists common faults, their causes, and recommended repair procedures.
Identifies essential safety guards that must be in place during operation.
States compliance with safety standards and operator responsibilities.
Introduces the spare parts index and its structure.
Lists spare parts for the basic machine unit.
Lists spare parts for the table assembly.
Lists spare parts for the knife block unit.
Lists spare parts for the drive mechanism.
Lists spare parts for the rebate support.
Lists spare parts for the automatic rebate supports accessory.
Describes the features and benefits of the automatic rebate support accessory.
Provides step-by-step instructions for installing the automatic rebate support.
Explains how to adjust the rebate supports for the automatic attachment.
To Next Page
General