Morso F - Adjustments

Instruction Manual
MORSØ Mitring Machine
Model F
20
Before Operating
Before operating the machine the following must be checked and adjusted:
1. Check
a) Knives (5)
General condition
Sharpness
b) Waste
Room for waste cuttings
c) Safety devices
Fitting of all safety devices:
Safety guard for knives (47)
Safety guards on fences (49)
d) Table and table extension
Cleanliness and undamaged surface
2. Adjustments
a) The angle of the fences (17+18)
(adjustment instructions page E-3)
b) Length of moulding (23)
(adjustment instructions page E-4)
c) Rebate supports (31)
(adjustment instructions page E-5)
d) Forward movement (13)
(adjustment instructions page E-5)
e) Height stop (41)
(adjustment instructions page E-6)
Operating Instructions E-2