Morso F - Functional Description; General Description

Instruction Manual
MORSØ Mitring Machine
Model F
4
General Description
MORSØ-F mitring machine is an invaluable help to make perfect 45 degrees mitres in
wooden mouldings for Picture Framers, and general woodworking, including Dado railings,
Architraves, skirting boards and kitchen and bedroom wood mouldings.
MORSØ-F is a manual foot-operated machine. The operation is simple and effortless.
MORSØ-F mitring machine is provided with an adjustable moulding measurement stop,
measuring scale for both length and width, available in metric and imperial, adjustable fences
from 45 degrees through to 90 degrees on either side of the knife block, plus adjustable
rebate supports.
MORSØ-F cuts a double mitre at 45 degrees and a single mitre up to 90 degrees.
MORSØ-F allows you to achieve a perfectly smooth, clean, and accurate finish, by nibbling
the work piece in two cuts. Movement of the knife block (nibbling) forward and rearwards is a
manual operation on the MORSØ-F.
The forward movement of the knife block is so arranged, that the final movement is half that
of all previous movements, and is known as the ‘trim cut’.
A unique lever system ensures the cutting operation is effortless, and double return springs
return the knife block to the start position.
The vertical movement of the knife block (length of stroke) is adjustable to suit the height of
the work piece.
The pieces of moulding can be cut so accurately that they can be joined without further
finishing.
Functional Description B-1