Morso F - Page 6

Instruction Manual
MORSØ Mitring Machine
Model F
6
Overview
Pos. Designation Pos. Designation Pos. Designation
1 Frame 20 Hand Lever, Fence,
right hand
34 Foot Pedal
2 Machine Table 35 Foot Pedal Tipper
3 Table Extension 21 Scale in Degrees, Fence,
left hand
36 Lock Nut *
4 Knife Block 37 Nut *
5 Knives 22 Scale in Degrees, Fence,
right hand
38 Draw Bow *
6 Knife Bolt * 39 Draw Bow Holder *
7 Knife Bolt * 23 Stop Block 40 Draw Bar *
8 Knife Bolt * 24 Star Wheel 41 Height Stop
9 Bottom Knives * 25 Stop Beam 42 Springs *
10 Vertical Slide Frame 26 Measuring Scale 43 Spring Anchor *
11 Cross 27 Pin * 44 Nut *
12 Guides 28 Bolt * 45 Outer Washer *
13 Lever 29 Pin * 46 Lever System *
14 Lock-nut * 30 Cylinder Screw * 47 Safety Guard
15 Off Set Bush * 31 Rebate Supports 48 Star Wheel *
16 Tooth Arc 32 Knurled Lock Nut,
Rebate Support *
49 Safety Guards, Fences
17 Fence, left hand
18 Fence, right hand 33 Knurled Nut,
Rebate Support *
19 Hand Lever, Fence, left hand * = not shown/indicated
Functional Description B-2