Motic EasyScan One - Appendix; Specifications; Electrical Specification; Working Environment

34
6. APPENDIX
6.1 Specifications
Slide Capacity 1-slide tray can load 1 slide
Slide Tray Dimension 120 x 100 x 5.8mm
Slide Dimension 76x25x1mm
Objective
Plan APROCHROMAT 20x/0.75
S APO 10x/0.3
Resolution
Under 20X magnification, scanner resolution is 0.52μm/pixel tolerance
Under 40X magnification, scanner resolution is 0.26μm/pixel
Light Illumination 10W LED, Auto-control intensity (99 grade)
Main Camera 5M Pixel
Communication Port USB 3.0
6.2 Electrical Specification
● Input voltage: 100-240V ~ 50-60Hz
● Input power: 100VA
● FUSE: 250V T2.5AL (If damaged, replace the fuse with the same specifications.)
6.3 Working Environment
● For indoor use
● Altitude: within 2000m (Higher than this altitude needs to be revised accordingly based on
international coefficient)
● Environment temperature: 5°C ~ +40°C
● Humidity: 30% - 75% (No condensation)
● Voltage: power supply voltage fluctuation should not be more than ± 10% of nominal voltage;
● Air pressure: 75kPa~106kPa
6.4 Storage Environment
● Temperature: 0°C ~ +40°C
● Humidity: 10% ~ 90% (No condensation)