27
MESSAGE RECORDING
Press the or button until the Msg
Record? menu is shown. Press the ENTER
button to begin the next step.
Press the or button until the desired
message is shown on the display.
When ready, Press-and-Hold the ENTER button
to begin recording. All sounds picked up by the
microphone will become part of the message.
Make sure you are in a quiet environment.
Msg Record?
Select Message?
Local Message
Hold ENTER Btn
To Record Msg
MESSAGE RECORDING
To program new messages, it is
recommended to use the button to
wake-up the CB300-D system to prevent an
outgoing broadcast over the radio system.
The CB300-D system will support up to 3
messages of 10 seconds each. The system
expects the following message order:
Message 1: Local Message (Message played
back on local speaker)
Message 2: Radio Message (Message
broadcast to radio when the Call Button is
pressed)
Message 3: Low Batt Msg (Message
broadcast to radio when the Callbox is low
on battery)
To Next Page
Loading...
