33
SETTING PROFILE ID
Press the or button until the Set Profile
ID? menu is shown. Press the ENTER button
to begin the next step.
The Profile ID is changed one digit at a time
(starting with the THOUSAND digit). Use
the or arrow button to change the
digit, and press ENTER to save the value and
select the next digit. Press to exit without
any changes.
Set Prole ID?
DIG: *
New: 3000
The profile ID is typically set to create a private communications channel between the Callbox
and the receiving radio. The default profile ID is set = 0000, and can be changed to any number
from 0000-9999. Both the Callbox and the receiving radio must have identical profile ID’s and set
for the same channel to receive the radio broadcast.
EXAMPLE: Write a new Profile ID = 3692
NOTE: An asterisk “*” will appear above
the digit enabled for modification.
SETTING PROFILE ID
To Next Page
Loading...
Need help?
General
