36
CYCLE DELAY
CYCLE DELAY
Press the or button until the Cycle
Delay? menu is shown. Press the ENTER
button to begin the next step.
Use the or buttons to increase/de-
crease the Cycle Delay selection. The range
is 10-180 seconds.
Press-and-Hold the or button for faster
increments.
Press ENTER to select the new Cycle Delay,
or to exit without any changes.
Cycle Delay?
Old: 45 sec
New: 45 sec
The Cycle Delay refers to the delay (in seconds) between repeating RF broadcasts that occur
when the call button (or aux) button is active. System Default: 45 seconds
NOTE: Hidden Menus must be enabled to view this selection.
To Next Page
Loading...
Need help?
General
