38
SET LED PATTERN
SET LED PATTERN
The CB300-D will support two LED patterns: All ON or Logo Only. The “All ON” selection is not
recommended due to the battery powered application.
AVAILABLE PATTERN SELECTIONS
Press the or button until the Set LED
Patt? menu is shown. Press the ENTER
button to begin the next step.
Use the or Color selection (All On, Logo
Only). Press ENTER to select the new value or
to exit without any changes.
Set LED Patt?
Old: 1 ALL ON
New: 2 Logo
ALL On: All 4-LED’s will turn ON when the
Call is active.
Logo Only: The front Logo LED will turn ON
with the Call is active. All other LED;’s will
remain OFF. This pattern is the most energy
efficient for battery power.
To Next Page
Loading...
Need help?
General
