Status Charger Display LED Indicator
OR
HOT CHARGER
WAITING TO CHRGE
NOTE:
● The following messages are introduced in software version V1.05:
○ Cannot Discharge, for LT Storage
○ Store Incomplete, Low Capacity:yy%
○ Hot Charger, Waiting to Chrge
● The following messages are introduced in software version V1.11.01:
○ Wrong Batt Type, Cannot LT Store
○ Radio Pocket, Cannot LT Store
○ Charging Pocket, Cannot LT Store
Table 15: Long-Term Storage Indications of an IMPRES 2 or IMPRES Battery (Calibrated Battery, Must
Charge Up to Selection)
Status Charger Display LED Indicator
Charger Powers On
IMPRES 2
CHARGER
Green for approximately 1 sec-
ond
Battery Detected
IMPRES 2
BATTERY
OR
IMPRES
BATTERY
Steady red
Rapid Charging
STORAGE CHARGE
xxx% Rated Cap
Steady red
Long-Term Storage Complete
LONGTERM STORAGE
xxx% Rated Cap
Steady green
Fault
● Battery is not making
proper electrical contact
with the charger.
● Battery is not an IMPRES
2 or IMPRES battery.
● An unknown condition
is preventing the battery
from being discharged.
● Charging is completed be-
fore the Long-Term Stor-
age goal is reached.
WARNING:
NOT CHARGEABLE
REMOVE & REINSERT
OR
WRONG BATT TYPE
CANNOT LT STORE
OR
CANNOT DISCHARGE
FOR LT STORERAGE
OR
Flashing red
MN002407A01-AK
Chapter 5: Charging Indication
34
To Next Page
Loading...
