Motorola solutions IMPRES 2 User Manual

状态 充电器显示屏 LED 指示灯
或
SHIP INCOMPLETE
Low Capacity:yy%
或
RADIO POCKET
CANNOT SHIP LI
或
CHARGING POCKET
CANNOT SHIP LI
待机
● 电池正在等待快速充电。
● 电池过热、过冷或低电
压。
● 充电器过热。
警告：
HOT BATTERY
WAITING TO CHRGE
或
COLD BATTERY
WAITING TO CHRGE
或
VERY LOW BATTERY
WAITING TO CHRGE
或
HOT CHARGER
WAITING TO CHRGE
呈琥珀色闪烁
注释:
● 以下消息在版本 V1.05 软件中引入：
○ Ship LI Discharge, xxx% Rated Capacity
○ Ship LI Charge, xxx% Rated Capacity
○ LI Ready to Ship, xx% Rated Capacity
○ Cannot Discharge, for LI Shipment
○ Ship Incomplete, Low Capacity:yy%
● 以下消息在版本 V1.11.01 软件中引入：
○ Wrong Batt Type, Cannot Ship LI
○ Radio Pocket, Cannot Ship LI
○ Charging Pocket, Cannot Ship LI
表 18： 让锂离子电池做好运输准备的状态指示（IMPRES 2 或 IMPRES 电池已校准，必须充电）
状态 充电器显示屏 LED 指示灯
充电器开启 IMPRES 2
CHARGER
呈绿色亮起约 1 秒钟
MN002407A01-AK
章节 6: 让锂离子电池做好运输准备
37

Motorola solutions IMPRES 2 Specifications

General

Brand	Motorola solutions
Model	IMPRES 2
Category	Battery Charger
Language	English