Motorola solutions L5Q - Figure 1: Attaching Antennas; Getting Started; Figure 2: Slide in the Spreader Bar

Chapter 2
Getting Started
This section provides instructions to prepare the L5Q camera for use.
2.1
Attaching the L5Q Antennas
Procedure:
1 Screw both antennas onto the faceplate of the camera.
Figure 1: Attaching Antennas
2 Slide the Horizontal Spreader Bar into a place down to the stops on the back of the antennas,
just above the spreader bar.
Figure 2: Slide in the Spreader Bar
MN007598A01-AD
Chapter 2 : Getting Started
10