EasyManua.ls Logo

Motorola solutions Avigilon 8.0C-H5A-FE-DO1 - User Manual

Motorola solutions Avigilon 8.0C-H5A-FE-DO1
72 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Installation Guide
Avigilon™ H5A Fisheye Camera Models:
8.0C-H5A-FE-DO1 12.0W-H5A-FE-DO1
8.0C-H5A-FE-DO1-IR 12.0W-H5A-FE-DO1-IR
8.0C-H5A-FE-DC1 12.0W-H5A-FE-DC1

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the Motorola solutions Avigilon 8.0C-H5A-FE-DO1 and is the answer not in the manual?

Motorola solutions Avigilon 8.0C-H5A-FE-DO1 Specifications

General IconGeneral
BrandMotorola solutions
ModelAvigilon 8.0C-H5A-FE-DO1
CategoryDigital Camera
LanguageEnglish

Summary

Important Safety Information

Safety Warnings and Precautions

Details critical warnings and cautions for device operation, including potential hazards and necessary precautions.

Regulatory Notices

Disposal and Recycling Information

Legal Notices

Disclaimer

Surface Mount Overview

Cover View

Details the external components visible on the camera's dome cover, including the dome cover itself and tamper-resistant screws.

Internal View

Illustrates and describes the internal ports and components of the camera, such as Ethernet port, microphone switch, and microSD card slots.

Bottom View

Shows the underside of the camera, detailing mounting slots, lanyard anchor, and the serial number tag.

Wall Plate Adapter View

Illustrates the wall plate adapter, highlighting cable entry holes, camera mounting posts, and mounting holes for electrical boxes.

In-Ceiling Mount Overview

Cover View

Describes the in-ceiling cover, cover lock, mount lock, microphone, and camera lens of the in-ceiling model.

Internal View

Details the internal components and ports of the in-ceiling camera, including Ethernet port, microphone switch, and status LEDs.

In-Ceiling Mount View

Shows the in-ceiling mount adapter and clamps used for securing the camera to a ceiling.

Pendant Mount Overview

NPT Adapter View

Illustrates the NPT adapter components, including the pendant NPT adapter, NPT pipe, and related fittings.

Pendant Wall Mount Bracket View

Depicts the pendant wall mount bracket, showing bracket mounting holes, mounting tabs, and mounting points.

Pendant Wall Mount View

Details the pendant wall mount, including the NPS thread mount and NPT pipe entry hole.

Preparing the Installation

Pre-Deployment In-Box Configuration

Provides instructions for configuring camera settings before physical installation using the RJ45 configuration cable.

Removing the Fisheye Cover

Mounting and Aiming Video Analytics Cameras

Inserting an Ethernet Cable through the Single-Hole Grommet

Inserting Cables through the 3-Hole Grommet

Surface Mount Installation

Required Tools and Materials

Lists the necessary tools and materials required for the surface mount installation of the camera.

Camera Package Contents

Details the items included in the surface mounted camera package for installation.

Mounting in the Correct Orientation

Provides guidance on orienting the camera correctly for wall mounting, using an orientation arrow.

Mounting the Camera to a Ceiling or Wall

Mounting the Camera Using the Side Conduit Entry Hole

Mounting the Camera to an Electrical Box

Surface Mount Cable Connection

Installing the Fisheye Cover

In-Ceiling Mount Installation

Required Tools and Materials

Lists the necessary tools and materials for the in-ceiling mount installation.

Camera Package Contents

Details the items included in the in-ceiling mounted camera package.

Mounting in the Correct Orientation

Guidance on camera orientation for in-ceiling mounting, ensuring correct alignment.

Using the In-Ceiling Mounting Adapter

Installing the Camera Base into the Mounting Adapter

In-Ceiling Mount Cable Connection

Installing the In-Ceiling Cover

Pendant Mount Installation

Required Tools and Materials

Lists tools and materials for pendant mount installation, including NPT adapter requirements.

Camera Package Contents

Details items included in the surface mounted camera package and NPT adapter package.

Mounting the Camera to a Pipe

Mounting the Camera to the Pendant Wall Mount

Installing the Camera into the NPT Adapter

General Cable Connections

Installing the Fisheye Cover

Connecting to the Camera

Initializing a Camera Username and Password

Instructions for creating an administrator user account for camera operation.

Assigning an IP Address

Details how the device obtains an IP address and methods for changing IP address settings.

Accessing the Live Video Stream

Configuring Onboard Storage

Enabling the Microphone

Configuring the Microphone

Configuring the Camera

For More Information

Cable Connections

Connecting External Power

Instructions for powering the camera using the removable power connector block when PoE is unavailable.

Connecting to External Audio and I;O Devices

Details how to connect external audio and I/O devices using the camera's connector block.

Connection Status LED Indicator

Troubleshooting Network Connections and LED Behavior

Resetting to Factory Default Settings

Setting the IP Address Using the ARP;Ping Method

Cleaning

Dome Bubble

Instructions for cleaning the camera's dome bubble to ensure clear video image quality.

Body

Guidelines for cleaning the camera body using appropriate materials.

Limited Warranty and Technical Support

Related product manuals