Configuring the Camera
Once installed, use one of the following methods to configure the camera:
l If you have installed multiple cameras, you can use the Avigilon Camera Configuration Tool to
configure common settings. For more information, see the Avigilon Camera Configuration Tool User
Guide.
l If the camera is connected to the Avigilon Control Center system, you can use the client software to
configure the camera. For more information, see the Avigilon Control Center Client User Guide.
l If the camera is connected to a third-party network management system, you can configure the
camera's specialty features in the camera's web browser interface. For more information, see the
Avigilon High Definition H4 and H5 IP Camera Web Interface User Guide.
For More Information
Additional information about setting up and using the device is available in the following guides:
l Avigilon Control Center Client User Guide
l Web Interface User Guide — Avigilon High Definition H4 and H5 IP Cameras
l Avigilon Camera Configuration Tool User Guide
l Designing a Site with Avigilon Video Analytics
These guides are available on help.avigilon.com and on the Avigilon website: avigilon.com/support.
Configuring the Camera 57
To Next Page
Loading...
