You Hear Tone Name Heard
Unique,
Low-Pitch-
ed Chirp
New Message When a new message is received.
Unique,
High-Pitch-
ed Chirp
Priority Status When a priority message is received.
Phone Call Displays and Alerts
The following phone call displays and alerts appears on the radio display when you make and receive
Phone calls. The radio also uses alert tones to indicate the current status.
You Hear You See When Notes
A Long
Tone
No phone You press the PTT
button and the phone
system is not availa-
ble.
Press to hang up. The radio re-
turns to the Home screen.
Phone
busy
The phone system is
busy.
Press to exit the phone mode and
try your call later.
A Busy
Tone
Phone
busy
When a channel is not
available.
The radio automatically connects
when a channel opens.
– No ac-
knowledge
The call is not ac-
knowledged.
Press to hang up. The radio re-
turns to the Home screen.
A High-
Pitched
Tone
– When you release the
PTT button.
The radio indicates to the landline par-
ty that the caller may begin talking.
NOTICE: You have the option of sending additional digits (overdial), such as an extension
number, credit card, or PIN numbers to the phone system. If the radio is preprogrammed for live
overdial, every digit entered after the call is connected, is sent to the phone system.
If the radio is preprogrammed for buffered overdial, the digits pressed are entered into memory
and then sent when the PTT button is pressed. Press the PTT button to send either digits or
voice, but not both at the same time.
6875946M01-JK
Status Indicators
39
To Next Page
Loading...
