2.1.1
Using ViQi Virtual Partner
Prerequisites: See ViQi on page 48 for the queries supported by this feature.
Procedure:
1 Press and hold the assigned ViQi button.
2 After you hear a tone, clearly speak your request into the microphone.
3 Release the assigned programmable button and wait for ViQi to respond.
4 Throughout your session, repeat steps step 1 through step 3 when responding to ViQi.
Depending on your query, you can also say the following requests:
• To play the available results, say "Play results".
• To request for more details, say "More details".
• To complete the Virtual Partner session, say "Complete".
2.2
Advanced Call Features
This chapter explains the operations of the call features available in your radio.
2.2.1
Calling a Phone Not in the List
Procedure:
1
or to Phon.
2 Press the Menu Select button directly below Phon.
3 Enter the desired phone number on the keypad.
The display updates as the numbers are entered.
4 Press the button or the PTT button on the keypad microphone to make the call.
5 Press and hold the PTT button to talk. Release the PTT button to listen.
6 Press or Menu Select button directly below Phon to exit.
2.2.2
Selective Call (ASTRO Conventional Only)
A Selective Call is a call from an individual radio to another individual radio with privacy.
2.2.2.1
Receiving a Selective Call
When and where to use: When you receive a Selective Call, you hear two alert tones and the LED
lights up solid yellow. The call received icons blinks and the display shows Call received.
The speaker unmutes.
Procedure:
1 Hold the microphone vertically 1 to 2 inches (2.5 to 5.0 cm) from your mouth.
2 Press and hold the PTT button to talk. Release the PTT button to listen.
6875946M01-JK
Advanced Features
49
To Next Page
Loading...
