Motorola APX 5500 - Receiving a Text Message; Removing a Priority Status and a Reply Request from a Text Message; Viewing a Text Message from the Inbox

3 or to RqRp and press the Menu Select button directly below RqRp to request for a reply.
The priority status and request reply icons appear beside the normal message icon on the label bar.
2.10.4.6
Removing a Priority Status and a Reply Request from a Text Message
Prerequisites: Ensure that a outgoing message is composed to allow you to perform this procedure.
See Composing and Sending a New Text Message on page 75 for more information.
Procedure:
1 Press the Menu Select button directly below Optn .
2
or to Impt and press the Menu Select button directly below Impt to remove the priority
status icon.
3 or to RqRp and press the Menu Select button directly below RqRp to remove the reply
status icon.
The display shows the normal message icon on the label bar.
2.10.4.7
Receiving a Text Message
When and where to use:
NOTICE: When you receive a message that is flagged with the Request Reply icon, you must
manually respond to the sender that you have received the message. The system will not
automatically send a notification to acknowledge that the message was received.
Procedure:
Do one of the following to receive a text message. You can use the options interchangeably
depending on your preference and the programmed functions.
• Receiving a text message using the Data Feature button or the TMS Feature button:
When you receive a message, press and hold the preprogrammed Data Feature button or
the TMS Feature button to access the Inbox.
• Receiving a text message using the radio menu:
When the new message icon appears and the display shows momentary New msg, press
the Menu Select button directly below TMS to access the Inbox.
The display shows a list of aliases or IDs, with the sender of the latest received message on top.
2.10.4.8
Viewing a Text Message from the Inbox
When and where to use: The Inbox can hold up to 30 messages.
NOTICE:
or to read the message if the content fills more than one screen.
Procedure:
1 Perform one of the following actions:
• Press the preprogrammed Data Feature button or the TMS Feature button to access the
TMS feature screen.
or to Inbx and press the Menu Select button below Sel .
6875946M01-JK
Advanced Features
79