Automatic Registration Service
(ARS)
This feature provides an automated data application
registration for the radio. When you turn on the radio, the
device automatically registers with the server.
Data applications within the fixed network can determine
the presence of a device on the system and send data to
the device. For example: Text Messaging Service (TMS).
The ARS for the radio consists of two modes:
• ARS Server Mode (default mode)
• ARS Non-Server Mode
NOTICE:
The default ARS mode can be changed by a
qualified radio technician using the radio’s
programming software.
Selecting or Changing the ARS Mode
The following methods are options on how to select or
change the ARS Mode. The result of all the methods is the
same. You can use the options interchangeably depending
on your preference and the programmed functions.
• Selecting or Changing the ARS mode using the 16-
Position Select knob:
a. Once the zone you want is displayed, turn the
preprogrammed 16-Position Select knob to the
desired mode.
• Selecting or Changing the ARS mode using the radio
menu:
a. or to Chan.
b. Press the Menu Select button directly below
Chan.
The display shows the current channel name.
c. or to the required channel or mode.
One of the following scenarios occur:
• In ARS Server Mode, the display shows the
zone and ARS server channel.
• In ARS Non-Server Mode, the display shows
the zone and ARS non-server channel.
English
Send Feedback 107
To Next Page
Loading...
