Motorola APX 6000XE - Turning on the Bluetooth Audio

If unsuccessful, the display shows BT profiles not
supported. The display returns to Available Dev
screen.
2 Press Ok to continue pairing the radio and the
device.
The pairing process can be canceled by pressing the
Menu Select button below Cncl.
If successful, the display shows Pairing in
progress,<Device Friendly Name> paired,
Connecting in progress... followed by <Device
Friendly Name>connected. The display returns to
the Bluetooth feature screen.
If unsuccessful, one of the following scenarios will
occur:
• The display shows <Device Friendly Name>
pair failed (if the PIN numbers are different).
• <Device Friendly Name> connect failed (if the
connection fails).
The display returns to Available Dev screen.
Turning On the Bluetooth Audio
Do one of the following to turn on the Bluetooth audio. You
can use the options interchangeably depending on your
preference and the programmed functions.
• Turning on the Bluetooth audio using the radio menu
BT:
a. or to BT. Press the Menu Select button
directly below BT to access the Bluetooth feature
screen.
b. or to Bluetooth spkr and press the Menu
Select button directly below On.
The display shows On.
c. To return to the Home screen, press the Menu
Select button directly below Exit.
• Turning on the Bluetooth audio using the
preprogrammed button:
a. To route the audio routing from the radio to the
headset, short press the preprogrammed button.
You hear a short, medium-pitched tone. The
display shows Headset on.
English
Send Feedback 147