Do one of the following to view recent calls. You can use
the options interchangeably depending on your preference
and the programmed functions.
• Viewing recent calls using the preprogrammed
Recent Calls button:
a. Press the preprogrammed Recent Calls button.
b. or to scroll through the list.
c. To return to the Home screen, press the Menu
Select button directly below Exit, press or the
PTT button.
• Viewing recent calls using the radio menu:
a.
or to Rcnt.
b. Press the Menu Select button directly below
Rcnt to access the Recent Calls feature screen.
c. or to scroll through the list.
d. To return to the Home screen, press the Menu
Select button directly below Exit, or the PTT
button.
The radio automatically exits the feature, if the feature
inactivity timer is enabled, when the radio is left idle and the
timer expires. You will hear the Menu Inactive Exit Tone
upon feature exit.
Using the Flip Display
This feature allows you to flip the content of the top display
upside down. It is particularly useful when you would like to
read the top display while the radio is still in the carry
holder attached to your belt.
To flip the display, press and hold the
preprogrammed Light/Flip button.
Selecting a Basic Zone Bank
The Basic Zone Select feature must to be preprogrammed
to the 3-position A-B-C switch, while the Basic Zone Bank
feature must be preprogrammed to any side button or Top
(Orange) button before you can use this feature.
English
162 Send Feedback
To Next Page
Loading...
Need help?
General
