Time and Date Setup
You can set the time and date for your radio.
Settings:
• The default time setting is a 12-hour clock. The display
shows 12:00AM.
• The AM/PM selection is not available for the 24-hour
clock setting.
• The default setting for the domestic date shows MDY.
NOTICE:
Check with your dealer or system administrator for
additional programmable settings for this feature.
Editing the Time and Date
1
or to Clck.
2 Press the Menu Select button directly below Clck.
The display shows the current setting of the radio.
3 Press the Menu Select button directly below Edit.
The first item blinks.
4 Perform one of the following actions:
• or to change the selected item.
• or one or more times to move to an item you
wish to change. or to change the selected
item.
• Press the Menu Select button directly below Exit
to exit the screen without making any changes
and return to the Home screen.
5 Perform one of the following actions:
• Press the Menu Select button directly below Ok
once you have finished to save your changes and
return to the Home screen.
• Press the Menu Select button directly below Cncl
to discard all changes and return to the Home
screen.
Press
at any time to return to the Home screen
without saving your changes.
NOTICE:
If a call arrives while the radio is in the clock-
setting menu, the radio exits clock setting and
displays the call information. Any changes
made before the call is not saved.
English
168 Send Feedback
To Next Page
Loading...
