2 Rotate and lift the connector cover to disengage it
from the radio.
3 To attach the accessory connector cover, insert the
hooked end
of the cover into the slot above the
connector.
4 Press the top of the cover downward to seat it in the
slot.
5
Once in place, tighten by rotating the thumbscrew
clockwise by hand.
Using the Carry Holder
1 Position the radio within the carry holder with the
main speaker facing outward.
2 Slide the radio down into the carry holder until it
clicks in place.
English
32 Send Feedback
To Next Page
Loading...
