NOTICE:
This feature must be preprogrammed by a qualified
radio technician.
Receiving a Call Alert Page
When you receive a Call Alert page, you hear four
repeating alert tones and the LED blinks green. The call
received icons blinks and the display shows Page
received.
Press any button to clear the Call Alert page.
See Making a Talkgroup Call on page 68 or Making a
Private Call (Trunking Only) on page 69 for more
information on returning the call.
Sending a Call Alert Page
Do one of the following to send a call alert page:
NOTICE:
If the feature inactivity timer is enabled, your radio
automatically exits the feature when your radio is
left idle long enough for the time to expire. You hear
the Menu Inactive Exit Tone upon feature exit.
• Sending a call alert page using the preprogrammed
Quick Access (One-Touch) Call Alert Paging
button:
a. Press the preprogrammed Quick Access (One-
Touch) Call Alert Paging button to send a page
to the preprogrammed ID.
The display shows Paging...<Number>.
If the call alert page is sent successfully, you hear
a tone and the display shows Ack received. The
radio returns to the Home screen.
If the call alert page is not acknowledged, you
hear a low tone and the display shows No
acknowledge. Press the Menu Select button
directly below Ok to return to the main screen for
Contacts.
• Sending a call alert page using the radio menu
Page:
English
Send Feedback 89
To Next Page
Loading...
