Motorola APX 7500 05 - Figure 5-20. Slide the Control Head Onto Trunnion; Figure 5-21. Position Control Head as Desired

6878215A01
5-26 Motorcycle Radio Installation: Installing the Control Head Sunshield
3. Slide the control head onto the trunnion while aligning the edge of the control head with the
edge of the sunshield as shown in Figure 5-20. Make sure the Velcro properly adheres to the
control head.
Figure 5-20. Slide the Control Head onto Trunnion
4. Position control head as desired and install screws as shown in Figure 5-21.
Figure 5-21. Position Control Head as Desired