6878215A01
2-20 Standard Configurations: Radio Mounting
Figure 2-22. O9 Control Head Installation Exploded View
Figure 2-23. O5 Control Head Rear View
ADJUST THE CONTROL HEAD TO
DESIRED ANGLE AND SECURE
WITH WING SCREWS
USE FOUR MOUNTING SCREWS
ON ALL INSTALLATIONS
TRUNNION
DRILL FOUR 5/32'' HOLES
IN MOUNTING SURFACE
MOUNTING SURFACE
IMPORTANT
USE A METAL BACKING PLATE
(NOT SUPPLIED) IF MOUNTING
TRUNNION ON PLASTIC OR
UNSTABLE SURFACE
To Next Page
Loading...
