Motorola APX Series User Manual

Dynamic ID (Conventional Only)
Allows you to edit the ASTRO Individual ID and/or MDC Primary ID of the radio.
NOTICE:
• If the Dynamic ID menu key is not pre-programmed in the radio, use dongle to display
the menu key. Press the menu key and enter the password to view or edit the ASTRO
Individual ID and/or MDC Primary ID of the radio.
• If the password is not pre-programmed, press the menu key to directly view or edit the
ASTRO Individual ID and/or MDC Primary ID of the radio.
Dynamic Priority (Conventional Only)
Allows any channel in a Scan List (except for a Priority-One channel) to temporarily replace the
Priority-Two channel.
Emergency
Depending on the programming, initiates or cancels an emergency alarm or call.
Intercom
Enables users of multiple control heads to talk to each other using the control heads in a multi-
control head setup.
Internet Protocol Address
Displays the Internet Protocol (IP) address, device name, and status of the radio.
Location
Displays the current location (latitude, longitude, time, and date), and also the distance and bearing
to another location, or toggles GPS/Location between on and off.
Message
Allows you to access the message list.
Monitor (Conventional Only)
Monitors a selected channel for all radio traffic until the function is disabled.
Multiple Private Line (Conventional Only)
Allows you to access the Multiple Private Line lists.
Nuisance Delete
Temporarily removes an unwanted channel, except for priority channels and the designated
transmit channel from the scan list.
Phone Call
Allows you to make and receive calls similar to standard phone calls.
Private Call (Trunking Only)
Allows a call from one individual radio to another.
Priority Dispatch
Allows you to call the dispatcher on a different talkgroup.
Radio Profiles
Allows you to access a set of preprogrammed visual and audio settings of the radio.
Recent Calls
Allows you to view the recent call history of your radio.
Rekey Request
Notifies the dispatcher that a new encryption key is needed.
Repeater Access Button (RAB) (Conventional Only)
Allows you to manually send a repeater access codeword.
Reprogram Request (Trunking Only)
Notifies the dispatcher that a new dynamic regrouping assignment is needed.
6875947M01-HM
Radio Controls
21

Motorola APX Series Specifications

General

Operating Temperature	-30°C to +60°C
Bluetooth	Yes (Optional)
GPS	Yes (Optional)
Frequency Range	VHF, UHF, 700/800 MHz
Dimensions	Varies by model
Weight	Varies by model
Encryption	AES, DES
IP Rating	IP67
Digital Technology	P25 Phase 1 and Phase 2
Display	Full-color, high-resolution display