6.21.5
Stopping SSA Notification of a Single Site
Procedure:
1
or to SSA.
2 Press the Menu Select button directly below SSA.
The display shows the Site Alert screen.
3
or to STOP ALERT and press the Menu Select button directly below Sel.
The display shows the Select Site screen.
4 or to select the desired Site Alias and press the Menu Select button directly below SEND.
The display shows SENDING REQ.
If radio is out of range, roaming to a foreign system or in a failsoft situation, the display shows
REQ FAILED.
If the request is successful, the display shows REQ SUCCESSFUL.
If the site is not available, the display shows <SITE ALIAS> NOT AVAILABLE.
If the site does not exist, the display shows <SITE ALIAS> DOES NOT EXIST.
5 To return to the Home screen, press the Menu Select button directly below EXIT.
The SSA Alert for the designated site stops.
6.21.6
Stopping SSA Notification of a Single Site by Manual Entry
Procedure:
1
or to SSA.
2 Press the Menu Select button directly below SSA.
The display shows the Site Alert screen.
3 or to STOP ALERT and press the Menu Select button directly below SEL.
The display shows the Select Site screen.
4
or to [SITEID ENTRY] and press the Menu Select button directly below EDIT.
The display shows the Enter SiteID screen.
5 Key in the required Site ID and press the Menu Select button directly below SEND.
One of the following scenarios occur:
• If a wrong Site ID is entered, the display shows INVALID ID and prompts to enter the Site
ID again.
• If a correct Site ID is entered, the display shows SENDING REQ.
• If the request is successful, the display shows REQ SUCCESSFUL.
• If the single site is not available, the display shows <SITE ID> NOT AVAILABLE.
6875947M01-HM
Advanced Features
97
To Next Page
Loading...
Need help?
General
