86
Trunking Operation
Site-Button Operation
To check which site the radio has currently selected:
Press (W7) or (W9) momentarily.
The display momentarily shows the current site name and RSSI
(received signal strength indicator).
One of the following conditions can also occur:
• If the radio is not locked onto a site, but is scanning for a new
site, the display shows SCANNING.
• If the radio has not yet received site ID information for the
current site, the radio displays SITE XX.
Note: You can also initiate scanning to another site by holding
down until the display shows SCANNING.
Ste Site
Ste
To Next Page
Loading...
Need help?
General