18
Basic Operating Procedures
Adjusting the Squelch Level
1 Choose one of the following:
• W4, W5, and W7 Control Heads: Press and hold .
The display shows SQL XX; where XX is a squelch level
setting of 0 to 15.
• W9 Control Head: Press and hold momentarily.
The dis[play shows SQUELCH XX, where XX is a squelch level
setting of 0 to 15.
2 Adjust the squelch level by turning the Mode knob (W4) or by
pressing the Mode rocker switch (W5, W7, W9) to reach the
desired squelch level setting.
3 Press (W4, W9) or (W5, W7) to return to
the selected channel.
Mon
Sql
Home HOME
To Next Page
Loading...
