94
Secure Operation
Receiving a Private Message
Transmitting a Private Message
1 Select a mode by turning the Mode knob (W4) or pressing the
Mode rocker switch (W5, W7, W9).
2 Using the Volume knob (W4) or the Vol rocker switch (W5, W7,
W9), adjust the volume to a comfortable listening level.
In conventional modes and, if enabled, in trunking modes, the
BUSY light blinks and the radio unmutes when the radio is
receiving a private message.
Note: The secure on/off state does not affect received messages.
The radio automatically receives coded or clear messages.
1 Press to turn on the coded mode.
Some radio modes may have secure automatically set on or off
if the mode-strapped Secure feature is enabled.
The display shows the current key if multi-key has been
enabled.
Note: If the coded mode is selected, the D is on. If the standard
(clear) mode is selected, the D indicator is off.
2 Monitor the mode to be sure it is not in use.
3 Press and hold the PTT button to transmit.
The XMIT indicator lights, and the display shows the current key
selected when transmitting in the coded mode, if multikey and
Display on PTT are enabled.
D
To Next Page
Loading...
Need help?
General