76
Trunking Operation
Initiating an Enhanced Private Conversation Call
To initiate an Enhanced Private Conversation Call, select a unit to
call, then place the call.
1 Press .
The Call indicator lights, and the display shows the last
transmitted/received unit ID number.
2 Select a unit in one of the following ways:
• From the ID number list:
– Do nothing if you want to call the unit ID in the display.
OR
– Use the prestored list by turning the Mode knob (W4) or
by pressing the Mode rocker switch (W5, W7, W9) to
locate the name/ID you want to call.
OR
– Press the Mode up
rocker switch once, and then use
the keypad to directly advance to the desired list
member.
OR
– Enter, using the keypad, the ID of the desired unit.
Note: Using the keypad to enter the ID of another unit can only be
accomplished from the first display shown when CALL was
entered. If the list has been entered, scroll to the first display.
3 Press or the microphone PTT button.
A telephone-type ringing sounds if the unit you are calling is in
service. The display shows PLS WAIT (W4, W5, W7) or PLEASE
WAIT (W9).
Call
Sel
To Next Page
Loading...
Need help?
General