Selecting a Zone/Mode (Optional)
Selecting a Home Zone/Home Mode
Selecting Secure Mode
Selecting an Encryption Key
Selecting a Key Index
Erasing an Encryption Key
DISPLAY AND LIGHT INDICATORS
1 Press the Zone Up button or Zone Down
button to scroll to the desired zone.
2 Turn the Mode knob to select the mode.
Press the Home button.
Press and release the D button. The D indicator
lights up.
1 Press and hold the D button until a tone sounds.
2 Turn the Mode knob to scroll to KEY SEL.
3 Press Sel to enter the Key Selection Menu.
4 Turn the Mode knob to select desired key.
5 Press Sel to select key.
6 Press Home or the PTT button to quit.
1 Press and hold the D button until a tone sounds.
2 Turn the Mode knob to scroll to INDX SEL.
3 Press Sel to enter the Index Selection Menu.
4 Turn the Mode knob to select desired index.
5 Press Sel to select index.
6 Press Home or the PTT button to quit.
1 Press and hold the D button until a tone sounds.
2 Turn the Mode knob to scroll to ERASE KY.
3 Press Sel to enter the Key Erase Menu.
4 Turn the Mode knob to select desired index.
5 Press Sel to select index.
6 Press Home or the PTT button to quit.
Display/Light Meaning
BUSY light on Displayed conventional mode has
activity on it, or selected trunked
system is currently busy. Wait for
callback.
XMIT light on Indicates you are transmitting.
Dir indicator lit Radio is in direct (mobile-to-
mobile) operation.
PRI, NPRI
indicators lit
Display shows a mode in the scan
list with the indicated priority level.
P displayed Telephone dialing pause. Press
Sel to continue the dialing.
NO ACK displayed Unit being called with the
Enhanced Private Conversation or
Call Alert Page feature is not in
service, or emergency alarm or
status/message transmission is
not acknowledged by dispatcher.
NO ANSWR
displayed
Unit being called with Enhanced
Private Conversation or Call Alert
Page does not respond, but is
operational.
EMERGNCY
displayed
Radio is in emergency alarm or call
state.
NO EMERG
displayed
A mode incapable of emergency
transmission has been selected.
OUT RNG displayed Radio is out of range of the
trunking system.
To Next Page
Loading...
Need help?
General