68
Conventional Radio Features
4 Choose one of the following conditions that applies to your
current call:
• If the receiving unit answers, identify yourself and begin your
Selective Call.
• If, after a programmable time period, you are not connected,
the display shows NO ACK and a momentary, low-pitched
tone sounds.
Try again, or press or button to return
to normal operation.
• If you are out of the system’s range, a low-pitched tone
sounds.
Try again, or press or button to return
to normal operation.
• If the system is busy when you attempt to make a call, the
radio you are calling hears a telephone-type busy tone.
When a channel becomes available, the called radio
receives a call back and automatically keys up for three
seconds so that conversation can begin.
5 To return to normal operation, press or .
Note: If you do not press or button to hang
up, your unit will remain in the Selective Call state with the
other unit. You will miss all subfleet traffic and incoming
phone calls.
HOME Call
HOME Call
HOME Call
HOME Call
To Next Page
Loading...
