9-5
- Fail 02/90 if failure
- Wait for the first part of the DSP version number.
- Fail 02/90 if 100ms.
- Wait for the second part of the DSP version number.
- Fail 02/90 if 100ms.
11. Display errors if a fatal error exists at this point.
12. Checksum the codeplug.
- Test internal codeplug checksums.
- Fail 01/92 if failure.
- Test external codeplug checksums.
- Error 01/82 if non-fatal error; fail 01/82 if fatal error.
13. Power-up the EMC (if it is enabled in the codeplug).
14. Turn off the green LED.
15. Start up operating system.