Motorola CM360 User Guide

14
English
GETTING STARTED
SELECTING A RADIO CHANNEL
Your radio offers up to 100 channels, however some
may not be programmed. Check with your dealer for
more information.
Your radio will power up on a preprogrammed
designated channel or the channel that it was on
when it was powered down.
Change Channels
Method 1
Method 2.0
(Keypad Microphone)
If the default mode for the keypad microphone is
Channel entry then:
Method 2.1 (Keypad Microphone)
If the default mode for the keypad microphone is not
channel entry, then enter the channel mode.
Method 2.2
Press the channel mode direct access button, if
programmed by your dealer.
Enter and select the channel number according to
Method 2.0
Method 2.3 :
Note: The keypad microphone cannot be used to
enter the channel number during a call or
whilst the radio is in a scan.
1
In the idle state use
G or H to change
channel e.g.:
1 Enter the desired
channel number from
the keypad, e.g. 05:
2 Either Long press on
C or press #
on the keypad (if
programmed) to
select the channel.
CHAN 34
CHAN 5
CHAN 5
3 Display shows:
(for 2 seconds)
4 Display shows
channel selected
1 Short press on C To enter Menu
2
G or H until:
3 Short press on C To select
4 Display shows e.g.:
5 Enter and select the channel number
according to
Method 2.0
SELECTED
CHAN 5
CHANNEL
CHAN 11

Motorola CM360 Specifications

General

Brand	Motorola
Model	CM360
Category	Radio
Language	English