Motorola CM360 User Guide

44
English
UTILITIES
EXTERNAL ALARM
The external alarm feature activates the vehicle
horn and/or lights to inform you of an incoming call
when you are away from your vehicle.
You can switch External Alarm On or Off by using a
pre-programmed External Alarm button or via the
menu. Alternatively the alarm may be programmed
permanently On by your dealer.
An activated alarm can be cancelled by:
1. Answering the call.
2. The external alarm timer times out.
Using the External Alarm Button
1. Press the External Alarm button to switch
External Alarm on, when the feature enable
alert will sound and the display will show:
2. Press the External Alarm button again to
switch External Alarm off, when the feature
disable alert will sound and the display will
show:
Using the Menu
Note: If programmed permanently On by your
dealer, the alarm will always be active and
generate an alarm when you receive a call.
The Display will show:
ALRM ON
ALRM OFF
1 Ensure radio is in IDLE STATE.
2 Short press on C to enter menu
3 G or H until
4 Short press on C to select
5 G or H until:
6 Short press on C
to show current
status.
7 G or H
toggles on/off
8 Long press on C
to select
9 Display shows:
(for 2 seconds)
10 Radio exits menu
mode and display
shows e.g.:
UTILS
ALARM
ON
OFF
OFF
SELECTED
CHAN 05
EXT ALRM

Motorola CM360 Specifications

General

Brand	Motorola
Model	CM360
Category	Radio
Language	English