Motorola CM360 User Guide

43
English
UTILITIES
TALKAROUND
In your communications network, you may be using
a system to cover a larger area than is possible with
your radio. However, you can communicate with
another radio within your radio’s range without going
through the system by using the Talkaround feature.
This is especially useful when the system is down.
You can switch Talkaround On or Off by using a pre-
programmed Talkaround button or via the menu.
Using the Talkaround Button
1. Press the Talkaround button to switch on
Talkaround when the feature enable alert will
sound, the display icon J is lit and the display
will show:
2. Press the Talkaround button again to switch
off Talkaround when the feature disable alert
will sound, the display icon J is extinguished
and the display will show:
Using the Menu
TRND ON
TRND OFF
1 Ensure radio is in IDLE STATE.
2 Short press on
C to enter menu
3 G or H until
4 Short press on C to select
5 G or H until:
6 Short press on C
to show current
status.
7 G or H
toggles on/off
8 Long press on C
to select
9 Display shows:
(for 2 seconds)
10 Radio exits menu
mode and display
shows e.g.:
UTILS
TALKRND
ON
OFF
OFF
SELECTED
CHAN 05

Motorola CM360 Specifications

General

Brand	Motorola
Model	CM360
Category	Radio
Language	English