Motorola CM360 User Guide

28
English
RADIO CALLS
Multicall
On selection of Status Multicall, the last selected
status will appear on the display, .
Once the desired address is displayed, there are
two methods to select the address:
Method 1
Method 2
Press the PTT button or Call 1-4 to select address
and make the call.
Call1-4 are pre-programmed call buttons.
1 the left most digit will
flash.
2
G or H to edit the
first digit to the required
number.
3 Short press on C
to move the flashing
edit digit to the right.
4
G or H to edit the
second digit to the
required number.
5 Short press on C
to move the flashing
edit digit to the right.
6 Continue using the
G or Hand C
until the right most digit
is edited.
7 Short press on C
returns the edit digit
from the right most digit
to the first digit.The
number can be
corrected if required.
STAT 002
STAT 102
STAT 102
STAT 102
STAT 102
STAT 100
STAT 100
1 Long press on C To confirm selection
2 Display shows:
(for 2 seconds)
SELECTED

Motorola CM360 Specifications

General

Brand	Motorola
Model	CM360
Category	Radio
Language	English