Motorola CM360 User Guide

34
English
RADIO CALLS
Using the Menu
To initiate a DTMF call in permanent live-dial.
1 Ensure radio is in IDLE STATE.
2 Short press on
C to enter menu
3 G or H until
4 Short press on C to select
5 G or H until:
6 Short press on C
to show current
status.
7 G or H
toggles on/off
8 Long press on C
to select
9 Display shows:
(for 2 seconds)
10 Radio exits menu
mode and display
shows e.g.:
UTILS
DTMF
ON
OFF
OFF
SELECTED
CHAN 05
1 Enter the interconnect call from the keypad
microphone, you will hear a tone sequence.
Display shows e.g.
2 Wait for call to be set up when you will hear a
dial tone.
Display shows:
3 Enter desired phone number, taking care not
to press the PTT.
Note: Each DTMF digit is transmitted
instantly.
Display shows
entered digits:
4 Once the radio has connected to the called
number, you can begin the conversation.
Even though this is a phone call, your
conversation mimics a radio call, that means
that both parties speak in turn, i.e. press the
PTT to talk, release to listen.
5 To end the call press the Monitor Button or
change channel when the clear down call is
sent automatically from your radio to
shutdown the phone line.
122
ENTER
8116

Motorola CM360 Specifications

General

Brand	Motorola
Model	CM360
Category	Radio
Language	English