Motorola CM360 User Guide

40
English
UTILITIES
Using the Menu
The scan start alert tone will sound, the display icon
G will be lit and the LED indicator will blink green
during a scan operation. When a call on a channel is
detected the LED will stop blinking and the channel
number will be displayed.
Priority Channel
A scan list may contain a priority channel. This
means that a particular channel (for example, a
commonly used channel) may be checked more
frequently than other channels in the list during a
scan operation. Priority channels are programmed
into your radio scan lists by your dealer, however
when a priority channel is included in a scan list, the
scan icon changes from G to H when scan has
landed on the prioity channel.
Talkback
If the programmable Talkback option is set, you can
respond to any calls received during the scan
operation by pressing the PTT button before the
programmed hang-time ends. Check with your
dealer for details.
1 Ensure radio is in IDLE STATE, or in a call.
2 Short press on
C to enter menu
3 G or H until
4 Short press on C to select
5 G or H until:
6 Short press on C
to show current
status.
7 G or H
toggles on/off
8 Long press on C
to select
9 Display shows:
(for 2 seconds)
10 Radio exits menu
mode and display
shows e.g.:
UTILS
SCAN
ON
OFF
OFF
SELECTED
CHAN 05

Motorola CM360 Specifications

General

Brand	Motorola
Model	CM360
Category	Radio
Language	English