Motorola CP160

23
English
RADIO CALLS
RADIO CALLS
RECEIVING A SELECTIVE CALL
When you receive a selective call:
• The display shows F and the preprogrammed
name or ID of the calling radio.
• The LED indicator flashes yellow, if programmed
by your dealer/programmer.
• You hear two high-pitched tones.
SENDING A SELECTIVE CALL
You can send a Selective Call to a particular radio or
to a group of radios, as programmed by your dealer.
Press the preprogrammed Radio Call button and
proceed to step 4.
–
or –
1 To acknowledge the call, press and release the
PTT button.
2 Press and hold the PTT button to talk; release
to listen.
1 J to enter menu mode
2
L or M until
3 J to select
4 L or M until
5 J to select
6 L or M to locate the desired ID in the
Radio Call List.
7 Press the PTT button to send the call.
8 Press and hold the PTT button to talk; release
to listen.
9 When the call is completed,
K until you exit menu mode.
RAD CALL
RAD CALL
SEL CALL
SEL CALL