Motorola CP160

33
English
PHONE
PHONE
Your radio allows you to place and receive
telephone calls through a repeater (depending on
phone line availability).
• D appears on the display when you are in
Phone mode.
ACCESS THE REPEATER
Your dealer/programmer can preprogram your radio
in one of two ways to enter your access/de-access
code to the repeater.
Immediate Auto – your radio will transmit the
access/deaccess code automatically upon entering
phone mode or disconnecting a phone call. You will
hear a series of tones, and see your access/
deaccess code on the display, indicating that an
access/deaccess code is being sent automatically.
Delayed Auto – your radio will transmit the access
code upon a PTT button press. The de-access code
is sent automatically when you exit phone mode.
RECEIVE A PHONE CALL
When a phone call is received, a ringing tone
sounds, alerting you to answer the phone call.
Press the preprogrammed Phone button and skip to
step 6.
–
or –
1 Select a channel that has been programmed
for telephone.
2
J to enter menu mode.
3 L or Muntil
4 J to select
Note: The D appears on the display.
5 Press and hold the PTT button to talk. Hold
the radio in a vertical position with the micro-
phone 1 to 2 inches (2.5 to 5 cm) away from
your mouth. Release the PTT button when the
other party wants to talk, both parties will need
to speak in turn.
6 Disconnect the phone call when the
conversation is completed.
PHONE
PHONE