Motorola CP160

34
English
PHONE
DISCONNECT A PHONE CALL
MAKE A PHONE CALL
Note: Only the first 8 digits of the phone number
will be displayed on your radio's display.
Press the preprogrammed Phone button and skip to
step 6.
–or–
1 To disconnect a phone call if your radio has
Immediate Auto or Delayed Auto
programmed, exit Phone Mode.
2 Press the preprogrammed Phone button.
– or –
Press and hold K to disconnect the call.
Note: D disappears from the display.
1 Select a channel that has been programmed
for telephone.
2
J to enter menu mode.
3 L or M until
4 J to select
PHONE
PHONE
5 When you hear a dial tone:
L or M to
select a number from
the phone list.
Note: To redial the last number dialed, press
and release the PTT button immedi-
ately after the access code is sent. The
radio sends the last number dialled.
6 Press and release the PTT button, if required
for your radio.
7 When your party answers, press and hold the
PTT button to talk. Hold the radio in a vertical
position with the microphone 1 to 2 inches
(2.5 to 5 cm) away from your mouth. Release
the PTT button when the other party wants to
talk, both parties will need to speak in turn.
8 Disconnect the phone call when the
conversation is completed.
XXXXXXXX