Motorola CP160

38
English
TONE PREFERENCES
CALL TONE TAGGING
You can program your radio to sound a particular
alert tone when receiving Selective Call or Call Alert
(call tone tagging).
Note: Seven alert tones are available to select from
in the list.
ESCALERT
You can program your radio to increase the volume
of the alarm tones when a radio call is not
answered.
Press the preprogrammed Escalert button and
proceed to step 5.
– or –
1 J to enter menu mode.
2
L or M until
3 J to select
4 L or M until
5 J to select
6 L or M until
– or – until
7 J to select the desired setting.
8
L or M until you see and hear the tone
you want to use for this type of call.
9 J to select the desired setting.
you see:
10 K to return to
11 K until you exit the menu mode.
TONES
TONES
TONE TAG
TONE TAG
CALL ALT
SEL CALL
TONE SET
TONE TAG
1 J to enter menu mode.
2 L or M until
3 J to select
4 L or M until
5 J to select
6 L or M until
or until
7 J to select the desired setting.
TONES
TONES
ESCALERT
ESCALERT
ON
OFF