10 Getting started
Setting up your D10
Welcome screen
1.
WELCOME
is displayed and scrolls in dierent languages. Press m. The country
name is shown on the display.
2. Scroll
u
or
d
to your country and press m.
CONFIRM?
is displayed.
3. Press m to conrm.
The handset and base will reset to load the correct settings. The standby screen is then
displayed and your phone is ready to use.
You can still make and receive calls without rst selecting your country and network
operator, however the Welcome screen will re-appear until you have congured your
phone country settings.
Date and time
If you have subscribed to a Caller ID Service, the date and time is set automatically for all
handsets when you receive your rst call.
If you do not have a Caller ID service, you can set the date and time manually.
1. Press m, scroll
d
to
CLOCK/ALARM
and press m.
2.
DATE & TIME
is highlighted. Press m.
3. Enter the date using the format DD/MM e.g. 04/08 for 4 August and press m.
4. Enter the time using 24 hour format (HH:MM) e.g. 14:45 for 2:45pm and press m.
5. Press > to return to standby.
Your D10 is now ready for use.
To Next Page
Loading...
Need help?
General
